{"title":"Instructions","description":"\u003ch5\u003eSolid colours tech spec\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eHighly pigmented acrylic paint compound\u003c\/li\u003e\n\u003cli\u003eDry-fall powder coating\u003c\/li\u003e\n\u003cli\u003eNon-drip, non-dribble formula\u003c\/li\u003e\n\u003cli\u003eSuitable for steel, aluminium and carbon-fibre surfaces\u003c\/li\u003e\n\u003cli\u003ePermanent and resilient: UV-resistant and weather-resistant\u003c\/li\u003e\n\u003cli\u003eDeep matte colours\u003c\/li\u003e\n\u003cli\u003eEasily-achieved fading, stencilling and blending effects (see FAQ below)\u003c\/li\u003e\n\u003cli\u003eRequires no post-application equipment or heat treatment\u003c\/li\u003e\n\u003cli\u003e400ml can will cover a frame and fork in a single coat\u003c\/li\u003e\n\u003cli\u003eMinimum recommended coats: one\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eInstructions for use\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eEnsure surface is clean and dry.\u003c\/li\u003e\n\u003cli\u003ePrimer is not required in all cases but is recommended.\u003c\/li\u003e\n\u003cli\u003eWear protective gloves, protective clothing, eye\/face protection.\u003c\/li\u003e\n\u003cli\u003eAlways paint in an open space in the open air.\u003c\/li\u003e\n\u003cli\u003eShake can for at least 3 minutes before use (set a timer, it's important).\u003c\/li\u003e\n\u003cli\u003eTest spray for 2-3 seconds prior to application.\u003c\/li\u003e\n\u003cli\u003eOptimal temperature for spraying: 15-24°C (60-75°F). Do not use Spray.Bike if the temperature is below 13°C (55°F) or above 29°C (85°F), or if relative humidity is above 70%.\u003c\/li\u003e\n\u003cli\u003eAlways spray with the can in a vertical position, otherwise the paint might 'spit' unevenly.\u003c\/li\u003e\n\u003cli\u003eSolid colours: spray surface from a distance of 2-4 inches.\u003c\/li\u003e\n\u003cli\u003eFrame Builder’s Smoothing Putty, Frame Builder’s Transparent Finish, Frame Builder’s Cold-Zinc, Frame Builder’s Metal Primer, Frame Builder’s Carbon Primer, Frame Builder's Metal Plating: spray surface from a distance of at least 8 inches.\u003c\/li\u003e\n\u003cli\u003eKeirin Flake and Keirin Sunlight: spray surface from a distance of at least 12 inches.\u003c\/li\u003e\n\u003cli\u003eFrame Builder’s Top Wax: Spray onto a paper towel or soft lint-free cloth and apply gently.\u003c\/li\u003e\n\u003cli\u003eWhen spraying, keep hand moving at all times.\u003c\/li\u003e\n\u003cli\u003eAllow to dry before adding 2nd coat (touch dry: 10 minutes, complete cure: 2 hours).\u003c\/li\u003e\n\u003cli\u003eDo not use isopropyl alcohol or other strong solvents over paint. Isopropyl can be used on bare steel before primer.\u003c\/li\u003e\n\u003cli\u003eAt the end, turn can upside down and spray for 2 seconds before storing (this prevents clogging).\u003c\/li\u003e\n\u003cli\u003eProtect can from sunlight and temperatures exceeding 50°C\/122°F.\u003c\/li\u003e\n\u003cli\u003eFor a satin or gloss top-coat, finish with Spray.Bike Frame Builder's Transparent Finish - Satin\/Gloss. Two coats will be required for gloss.\u003c\/li\u003e\n\u003cli\u003eFor ongoing protection (whether the finish is matte, satin or gloss), regularly apply the Frame Builder's Top Wax.\u003c\/li\u003e\n\u003c\/ul\u003e","products":[],"url":"https:\/\/www.clcycle.ca\/collections\/bike-paint-spraybike-paint-instructions.oembed","provider":"C\u0026L Cycles","version":"1.0","type":"link"}